Carpets are commonly found in both residential and corporate settings. They can significantly enhance a space, however, their appeal diminishes when they get soaked with water. In this article, we’ll offer several strategies to prevent your carpet from getting damaged due to an accidental encounter with water.
PS: Don’t want to deal with clogged carpets? If so, don’t worry! We have skilled and experienced carpet cleaners in Malaysia that can help with all your carpet cleaning needs. Contact us today to learn more about our service!
What to Do Before Saving Your Carpet
Though it is best to dry your carpet quickly, especially when it’s water-cogged, there are a few things that you must do to effectively save your carpet, such as:
Fix Any Leak That Has Caused the Problem
If you have a broken pipe or any other leak in your home, fix it as soon as possible.
It is important that the water source is not available when trying to save your carpet because standing water will only worsen the problem and can lead to mold growth.
Limit Foot Traffic on Wet Carpets
Limit the amount of foot traffic on wet carpets.
This will help to speed up the drying process and prevent your carpet from being further damaged by walking or standing in water.
You can do this by laying down towels over any areas that are still damp, so people know where they should not walk.
Clear the Room For Easy Movement
Clear the room of any furniture and rugs to allow for easy movement.
This will help you clean your carpet thoroughly as well as prevent accidents from occurring since there is less clutter in the way.
Drying a Wet Carpet
After doing the things that need to be done before saving your carpet, it is now time to dry it.
Do this as soon as possible to prevent mold growth and further damage to your carpet.
Here are the four steps in drying your carpet:
Step 1: Remove the Water
Remove as much water from your carpet by blotting with a towel or using a shop vacuum.
Do not rub the area with the towel because this will only push the moisture further into your carpet and cause more damage.
Step 2: Use an Absorbent Towel
It is best that you use an absorbent towel because it will effectively soak up any moisture left in the carpet compared to a regular towel.
Do not use a scrub brush or anything that will further damage your carpet because it is already wet and susceptible to more damage.
Step 3; Air Dry Your Carpets
After removing as much water from your carpet, it is now time to let the area air dry.
Laying out an absorbent towel on top of your wet carpet and allowing the room where you are drying the carpet to become humid will help speed up the process since humidity aids in moisture evaporation which causes dampness to vanish more quickly than if there was no humidity present at all.
Step 4: Replace Your Carpet’s Padding
Once your carpet is completely dry, it is time to replace its padding.
This will prevent mold growth and increase the lifespan of your carpet by preventing future damage from occurring due to water seeping into the ground underneath your carpeting.
This will also prevent accidents from occurring, such as tripping or slipping.
The Keynotes
As you can see, it’s important to know how to clean a water-cogged carpet. If you don’t, it will become permanently damaged, and permanent stains are hard to remove.
This blog post has given you the information needed for this situation so that your carpets can be saved from being permanently stained or damaged with these easy steps.
If you have more questions in mind, do not hesitate to contact us today!